Emergency Power Wiring Kit (for 2017‑2021 Chevrolet Bolt EV)
EVEX‑1000B/EVEX‑1001B/EVEX‑1002B
Frequently Asked Questions | Brochure (PDF)
Purchase
Item Number | Item Description | Purchase |
EVEX-1000B | 2017-2021 Chevrolet Bolt EV 1000W Emergency Back-up Power Wiring Kit | $189.00 $179.00 Buy Now |
EVEX-1001B | 2017-2021 Chevrolet Bolt EV 1000W Emergency Back-up Power Wiring Kit, bundled with a 1000W pure sinewave inverter with 2000W surge. | $444.00 $434.00 Buy Now |
EVEX-1002B | 2017-2021 Chevrolet Bolt EV 1000W Emergency Back-up Power Wiring Kit, bundled with a 1500W pure sinewave inverter with 3000W surge. | $444.00 $434.00 Buy Now |
EVEX-1003B | 2017-2021 Chevrolet Bolt EV 1000W Emergency Back-up Power Wiring Kit, bundled with a 1500W pure sinewave inverter with 3000W surge and a remote switch. | $474.00 $434.00 Buy Now |
Features
- Detailed Instructions (with photos) Included
- Utilizes 12V accessory power system of the Bolt EV
- Includes all hardware and accessories designed specifically for the Bolt EV
- No drilling or other modifications to the Bolt EV are needed
- Quick disconnect system allows for easy connection of inverter
- Maximum continuous power supported: 1000W with 3000W surge
- Installation Time: 20 minutes
Description
The EVEX-1000B, EVEX-1001B, and EVEX-1002B are do-it-yourself** wiring kits to provide emergency backup power from your Chevrolet Bolt EV.
The kits are custom-designed for the Bolt EV (model years 2017-2021), to allow for a hidden installation with power connector
access under the front hood of the vehicle.
The kit includes a fuse holder with fuse, heavy duty wires cut to length with pre-installed wire terminals, and a heavy duty
connector set to allow quick connections to the inverter of your choice as needed.
The EVEX-1000B is designed for a maximum continuous power of 1000W with 3000W surge. The EVEX-1001B is the same wiring kit
bundled with a 1000W pure sinewave inverter. The EVEX-1002B is the same wiring kit bundled with a 1500W pure sinewave
inverter. These power ratings are designed to work within the limits of the Bolt EV's 12V power electronics design.
More Questions? Browse our EVEX‑1000B/EVEX‑1001B FAQ
Do you have kits available for continuous power greater than 1000W?
I want to run a fridge or freezer off my vehicle, will this kit work?
Will this void all or part of my vehicle's warranty?
Do you have wiring kits available for other vehicles?
EVEX‑1000B/EVEX‑1001B Frequently Asked Questions
Do you have kits available for continuous power greater than 1000W?
At this time, we have chosen to only offer a wiring kit that supports up to 1000W continuous power. While the wiring of the kit
we provide can handle 1500W, the 1000W limitation is to ensure that the power draw from the inverter will work properly with the
built-in power electronics of the 2017-2021 Chevrolet Bolt EV. Larger systems, combined with other electronics that are always
running in your vehicle, may draw more total power than the Bolt EV can provide, ultimately resulting in a dead battery or damaged
electronics within your vehicle. While a 1500W inverter may be used to help start appliances with higher start-up surge power
needs, usage should be monitored to ensure continuous loads do not exceed 1000W.
I want to run a fridge or freezer off my vehicle, will this kit work?
The compressor of a refrigerator requires an initial starting current that is much greater than the current it will use once the
compressor is running. Refrigerators are quite varied in size and energy efficiency, and as a result, this starting current
(also known as "surge current" or "surge power") can vary greatly, even among similarly sized refrigerators. The ability for an
inverter to provide this surge current can also vary greatly from product to product. As a result, it is often difficult to know
definitively if an appliance can be operated from a given inverter without simply trying it.
This kit has successfully powered a full-sized kitchen refrigerator having a nameplate rated current draw of 3.5 amps at 115VAC.
The methodology to label the power consumption of the appliance, however, also varies greatly. This test was done using just a
1000W pure sine wave inverter, with a rated 2000W surge capability.
As a general rule of thumb, people suggest measuring the continuous power of a fridge when the compressor is running, using a
Kill-a-Watt power meter. An inverter that can continuously supply 3 to 4 times this measured power is typically sufficient to
handle the initial starting current of the refrigerator's compressor. However, as stated above, the only real way to know is to
simply try it with the inverter you plan to use.
Will this void all or part of my vehicle's warranty?
There have been various discussions and posts on forums about whether or not a wiring modification such as this would void all or
part of your vehicle's warranty.
The wiring kit only makes a connection to the Bolt EV's 12 volt battery terminals. As a result, it would seem reasonable to conclude
that warranty issues as a result of this installation, if any, would be limited to the 12 volt system.
There is also the Magnuson-Moss Warranty Act of 1975 that states a dealer must prove that after-market equipment caused the need for
repairs before it can deny warranty coverage. (See Edmunds.com article:
What Voids your Vehicle's Warranty?)
This would suggest that only a small portion of your warranty could be voided, and only if the dealer can show it was this wiring kit
that caused the need for repairs.
However, EV Extend cannot make any definitive claims as to whether or not installing this kit will void your warranty.
Do you have wiring kits available for other vehicles?
Yes! In addition to this kit for the 2017-2021 Chevrolet Bolt EV, we also have kits for the following vehicles:
If you would like to be notified of when a particular vehicle has a kit available, please
contact us.
©2017-2024 EV Extend. All Rights Reserved.